_menuCloseDelay=500           // The time delay for menus to remain visible on mouse out
_menuOpenDelay=150            // The time delay before menus open on mouse over
_followSpeed=5                // Follow scrolling speed
_followRate=40                // Follow scrolling Rate
_subOffsetTop=10              // Sub menu top offset
_subOffsetLeft=-10            // Sub menu left offset
_scrollAmount=3               // Only needed for Netscape 4.x
_scrollDelay=20               // Only needed for Netcsape 4.x



with(menuStyle=new mm_style()){
onbgcolor="#8B5736";
oncolor="#FFFFFF";
offbgcolor="#FAF8D7";
offcolor="#000000";
bordercolor="#296488";
borderstyle="solid";
borderwidth=1;
onborder="1px solid #aaaaaa";
separatorcolor="#2D729D";
separatorsize="0";
padding=5;
fontsize="12px";
fontstyle="normal";
fontweight="bold";
fontfamily="Verdana, Tahoma, Arial";
pagecolor="#FFFFFF";
pagebgcolor="#999999";
headercolor="#000000";
headerbgcolor="#ffffff";
subimage="arrow.gif";
subimagepadding="2";
overfilter='randomdissolve(duration=0.5)';
//outfilter="Fade(duration=0.4)";
outfilter='randomdissolve(duration=0.5)';
}


with(milonic=new menuname("vane")){
style=menuStyle;
top=320;
left=690;
alwaysvisible=1;
followscroll="1";
orientation="horizontal";
aI("text=F. Casing;showmenu=casing_menu1;");
}

with(milonic=new menuname("casing_menu1")){
style=menuStyle;
overflow="scroll";


aI("text=The casing is often called the volute.<br>The volute shape is typically where the space between<br> the impeller and the casing wall increases as<br> you get towards the discharge. This helps reduce the turbulence<br> of the fluid leaving the impeller tips. The casing sometime has fixed vanes<br> called diffuser vanes which further help reduce the turbulence. A special design<br> called double volute effectively reduces the radial thrust. Pump casings<br> are built to certain standards, some pump manufacturers have their own<br> standards but in North America they mostly follow the standards of the<br>Hydraulic institute. A standard called ANSI B31.3 was devised to promote<br> intercheangablity of parts between manufacturers.<br>The API standard was devised to provide more robust casings that were required<br>in the petro-chemical industry.");
aI("text=See double volute;offbgcolor=red;offcolor=white;url=http://www.pumpfundamentals.com/pump_glossary.htm#gl171;");
aI("text=See diffuser casing;offbgcolor=red;offcolor=white;url=http://www.pumpfundamentals.com/pump_glossary.htm#gl151;");

}

drawMenus();